Konica Minolta DRYPRO 771, Installaton Manual

Page: 68 / 100

Ch.3 Settings
< 66 >
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
(1) Copying LUT Library on User LUT
Prepare the LUT that will be applied to each channel of the DRYPRO 771.
When it is desired to edit the LUT imported from the LUT LIbrary, first copy the LUT onto the User LUT.
How to copy the LUT of library on the User LUT is set out below.
To apply the LUT in the library directly to the LUT of the DRYPRO 771, procedures in "(1)
Copying the Library LUT to User LUT and (2) Editing the User LUT curve point by point" are not
necessary. Proceed to "(3) Applying the LUT in the LUT Library to each CH of the DRYPRO
771".
U50 USER LUT .
CH 1 MRI-1
Library Reading.
Please wait
U5I Press enter .
Copy from library
U5J LUT1 LB CT/MR .
CT&MR_KC_B
U51 USER LUT SETUP .
CH1 USER LUT 1
U52 LUT1 020-300 .
POINT01 020 X0.01D
1
Start the maintenance mode.
2
Press [
d
] of the [menu/select] key five times.
• "U50 USER LUT" is displayed.
3
Use the [select] key [
[
][
\
] to choose the
diagnostic device for which the LUT is to be
created and press the [enter] key.
• Selection of the diagnostic device will be followed
by display of a message indicating that the library
is being read.
• After completing the download, "U51 USER LUT
SETUP" screen will be displayed.
4
Use the [select] key [
[
][
\
] to choose the User
LUT No. to which the LUT will be copied.
5
Press the [enter] key.
• Setting screen for POINT 1 will appear.
6
Press the [menu/select] key
[
d
] 16 times.
• "U51 Press enter Copy from library" screen for
copying the LUT in the library to the User LUT will
appear.
7
Press the [enter] key.
8
Select the LUT in the library. (copy original)
• Use the [select] key [
[
][
\
] to select the diagnostic
device.
• Use the [menu/select] key [
d
][
c
] to select the LUT
in the library.
9
Press the [enter] key.
• The LUT in the library will be copied on the User
LUT of corresponding channel.
• The screen returns to the maintenance menu
screen.
U50 USER LUT .
CH 1 MRI-1