Konica Minolta DRYPRO 771, Installaton Manual

Page: 94 / 100

Ch.5 Print Commanded from the External Device and Backup
< 92 >
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
2
Plug the disconnected ethernet cable to the
maintenance PC's ether port.
1
Disconnect the one end of the ethernet cable
connected to the DRYPRO 771.
3
Start the maintenance PC.
4
Start the internet Explorer (ver. 5.0 or later)
•
Message "Page not found" will be displayed.
5
Input the DRYPRO 771's IP address in the
"Address (D)" box following "http://".
•
Input the address in the following format.
http://<IP address>/
•
Log in screen of the web maintenance tool will be
displayed.
System Requirements
To use the Web maintenance tool, the maintenance PC should satisfy the following
requirements.
• PC with 10BaseT/100BaseTX network port.
• PC with TCP/IP protocol installed.
• PC that operates on Windows95/98/2000/XP.
• Supports Internet Explore (ver.5.5 or higher).
• Java applet to be installed.
When the system of your PC is doubtful, download
"j2re_1_3_1_win_i_exe" from the SUN's homepage.
5.2.2 Back Up of the Initial Set Up Data Created at the Time of Installation
How to back up entire set up data and information including the data identical to the unit using the Web
maintenance tool is set out below.