Konica Minolta DRYPRO 771, Installaton Manual

Page: 24 / 100

Ch.1 Before Installation
< 22 >
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
3) Cover-C
Interior
1) Lever-A (Green)
Locks the deodorant filter case
2) Lever-BC (Green)
Opens the descent transport section
when a film jam occurs to allow removal
of the film.
3) Cover-C
(Between descent transport and exposure
sections)
May be opened when a film jam occurs
between the descent transport and
exposure sections to send the film
toward the left cover.
4) Film check cover
(Between exposure and elevator transport
sections)
Allows the film to be checked. Nor
normally used.
5) Deodorant Filter
Eliminates odors arising during film
printing.
6) Deodorant Filter Case
Contains the deodorant filter.
The cover may be opened to change
the filter.
Additionally, this case may be removed
when a film jam occurs between the
heat processing and ejection sections.
6) Deodorant Filter Case
5) Deodorant Filter
1) Lever-A
2) Lever-BC
4) Film Check Cover
Filter Housing
(Yellow)
Do not touch the Filter
Housing(Yellow) when
pulling out the
Deodorant Filter
Case. It may be heated
to 100 : or higher, and
touching it may cause
burn.
Be careful not to pinch
fingers when lifting the
Lever-A