Konica Minolta DRYPRO 771, Installaton Manual

Page: 98 / 100

Specification
< 96 >
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
Product Name Laser Imager DRYPRO MODEL 771
CODE No. UL : 0582
CE : 0583
Model DRYPRO MODEL 771
Laser Source Semiconductor Laser
Film Type Medical Imaging Film SD-P, SD-PC, DR-P
Film Size 14 X 17 inch
14 X 14 inch
11 X 14 Inch
Size to be determined when unit is installed.
Input Interface Ethernet 10 base-T / 100 base-TX
Protocol DICOM Print Management
Image Memory Hard Disk : 80GB Standard
Print Memory : 128MB Standard
Processing Approx. 110sheets/hr. (Continuous printing of 14 X 17 inch size)
Capacity
External 630
(W)
X 600
(D)
X 1125
(H)
mm (24.8
(W)
X 23.7
(D)
X 44.3
(H)
inch)
Dimensions
Weight 175 kg
External 790
(W)
X 780
(D)
X 1410
(H)
mm (30.8
(W)
X 31.0
(D)
X 55.2
(H)
inch)
Dimensions
(Packed)
Weight 205 kg
(Packed)
Power Source UL : Single Phase AC 120V / 8.5A (60Hz)
CE : Single Phase AC 220 - 240V / 4.5A (50/60Hz)
Generated Heat Approx. 950 kJ (Approx. 226kcal/hr.)
Environmental 15 - 30 : / 30 - 70 %RH (No condensation)
Conditions
(when running)
Conditions for -20 - 60
:
/ 20 - 90 %RH (No condensation)
Transport and
Storage
Noise Level 55dB or less.
Operation Panel LCD with membrane switch panel
Film Supply Trays
No. of Trays 1 (125 sheets/tray)
Image Data Input 8 bits (256-step gradation) or 12 bits (4096-step gradation)
(Depends on modality image signal.)
Output Gradation 16384-step gradation (14 bits)
Image Mode Pixel replication / Function interpolation process.
Pixel Size 78.6µm fixed.