Konica Minolta DRYPRO 771, Installaton Manual

Page: 80 / 100

Ch.4 Checking the Image
< 78 >
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
UA0 TIME SET /.
1
Start the maintenance mode.
2
Press [
d
] of the [menu/select] key ten times.
• "UA0 TIME SET" will be displayed.
4
Use the [menu] key to select the item to be
changed.
• "YEAR", "MONTH", "DAY", "HOUR" and
"MINUTES" is displayed in order.
3
Press the [menu/select] key to change the
value.
• "YEAR" : 1970 ~ 2037
"MONTH" : 01 ~ 12
"DAY" : 01 ~ 31
"HOUR" : 00 ~ 23
"MINUTES" : 00 ~ 59
5
Press the [enter] key after completing the
setting.
• Settings will be registered and display returned to
the maintenance menu screen.
UA1 TIME SET .
YEAR 2003
UA2 TIME SET .
MONTH 01
UA3 TIME SET .
DAY 14
UA4 TIME SET .
HOUR 10
UA5 TIME SET .
MINUTES 06
UA0 TIME SET /.
Data Saving... .
Please wait...
Operation Manual>
Maintenance
Mode>Time Setting
Summer time is
automatically set when
the time zone is set.
UA0 TIME SET /.
3.11 Checking the Internal Clock
Check the iternal clock of the DRYPRO 771, and correct if necessary.
Set "YEAR"
, "MONTH" , "DAY" , "HOUR" and "MINUTES".
When [exit] key is pressed in the "TIME SET" of the service maintenance mode, a
confirmation screen will be displayed. Select "YES" or "NO" for the register of the
changed data using [select] key [
[
][
\
].
When "YES" selected : Changes to the setting (data) are registered, and the
display returns to the maintenance menu screen.
When "NO" selected : Display returns to the maintenance menu without
registering the changes to the setting (data).
Data was changed
Save the data? YES