manualshive.com logo in svg

Keysight Technologies N5247B, Service Manual

The Keysight Technologies N5247B is a state-of-the-art measurement instrument offering precise RF and microwave analysis. To understand its features and optimize its use, download the comprehensive Service Manual for free from manualshive.com. This manual provides detailed instructions to maximize the capabilities of your device.

Share
Download
background image

4                                                                                                                      Keysight N5247B Service Guide  

Contents

Instrument Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
System Verification Procedure  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
Performance Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
Certificate of Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9

ANSI/NCSL Z540.3–2006 and ISO/IEC 17025 Verification . . . . . . . . . . . . . . . . . . . . . . . . . 3-10
Non-Standards Compliant Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11
Preliminary Checks  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12

The Operator’s Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12
The Test Port Cable Checks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-15

System Verification  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22

What the System Verification Verifies  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22
Measurement Uncertainty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22
Measurement Traceability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23
Performing System Verification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24

Performance Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-32

Source Power Accuracy Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-32
Source Maximum Power Output Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-33
Source Power Linearity Test  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-34
Frequency Accuracy Test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-35
Trace Noise Test  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-36
Receiver Compression Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-36
Noise Floor Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-38
Calibration Coefficients Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-39
Dynamic Accuracy Test – Version 1  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-40
Dynamic Accuracy Test – Version 2  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-41
Dynamic Accuracy at Low Frequency (Available with LFE Option 205/220/420/425)  3-43
DC Continuity Test the LFE Board and Test Ports (Available with LFE Option 

205/220/420/425)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-45
Receiver Noise Figure Test  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-45
Noise State Calibration Coefficients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-46
Noise Jitter Test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-46
Noise Receiver Linearity Test  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-47
Noise Receiver Compression Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-48

Dynamic Accuracy at Low Frequency (Available With Low Frequency Extension (LFE) Installed 

Option 205/425)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-51
DC Continuity Test the LFE Board and Test Ports (Available With Low Frequency Extension 

(LFE) Installed Option 205/425)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-53
Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-54

Touchscreen Adjustment and Verification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-54
10 MHz Frequency Reference Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-55
Synthesizer Bandwidth Adjustment  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-56

Summary of Contents for N5247B























































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for N5247B

Accu-Chek Inform II Training Manual preview
Inform II
Brand: Accu-Chek Pages: 12
Wavetek MS1000 Operation Manual preview
MS1000
Brand: Wavetek Pages: 43
QALCOMET HEAT 1 User Manual preview
HEAT 1
Brand: QALCOMET Pages: 52
TC Electronic Clarity M User Manual preview
Clarity M
Brand: TC Electronic Pages: 20
Yamaha Electone B-20CR Manual preview
Electone B-20CR
Brand: Yamaha Pages: 16
Energic Plus MPD-1007E Manual preview
MPD-1007E
Brand: Energic Plus Pages: 12
FISCHER ME49F Series Operating Manual preview
ME49F Series
Brand: FISCHER Pages: 20
Industrial Scientific iTrans 77023554 Manual preview
iTrans 77023554
Brand: Industrial Scientific Pages: 94
BGS technic BGS 8639 Instruction Manual preview
BGS 8639
Brand: BGS technic Pages: 16
Trotec OZ-ONE Manual preview
OZ-ONE
Brand: Trotec Pages: 8
wtw pH 3310 IDS Operating Manual preview
pH 3310 IDS
Brand: wtw Pages: 72
OHAUS MB27 Instruction Manual preview
MB27
Brand: OHAUS Pages: 64
Würth 0715 53 325 Translation Of The Original Operating Instructions preview
0715 53 325
Brand: Würth Pages: 28
Benetech GM8903 Instruction Manual preview
GM8903
Brand: Benetech Pages: 16
RADWAG PUE C/31H Quick Start Manual preview
PUE C/31H
Brand: RADWAG Pages: 12
AccuLine 40-6537 Service Manual preview
40-6537
Brand: AccuLine Pages: 15
T&D TR-81 Instruction Manual preview
TR-81
Brand: T&D Pages: 14
Ress SK7 Manual preview
SK7
Brand: Ress Pages: 11

Brands by name

Popular brands

Load more brands