Kaba Mas AUDITCON 100 series, Operating Instructions Manual

Page: 5 / 60

1
I
NTRODUCTION
Lock Models
The following table denotes some of the storage differences and user
limitations in the available models of the Auditcon
®
100, 200, 400, 500
locks. (See table below.)
Model Maximum # of Reserved # of Audit
Lock Users* Supervisor IDs Records Stored
100 5 01 10
200 19 01-03 100
400 99 01-05 200
500 99 01-05 400
* There are different types of classifications of personnel who can access the lock: a
Master User (maximum of one), Supervisors (the maximum number of Supervisors varies
according to lock model as shown in the table above), and Users. In the table above,
“Lock Users” refers to Supervisors and other Users (excludes the Master User). Refer to
“Lock Personnel Classifications” for more detail.
The instructions covered in this guide pertain to all models unless other-
wise noted.
Lock Housing Types
There are 3 types of housings that are available for each Auditcon model .
“
R ” denotes a Round lock housing, “ LP ” denotes the Low Profile housing,
and “ V ” denotes a Vertical lock housing. The type of housing does not have
any effect on operational procedures.
Power Source
There are two possible power sources available for the Auditcon 100, 200,
400, 500 locks. The standard power source is
PowerStar
TM
Technology .
With this technology an internal generator is used to create all necessary
power. The lock must be powered before any operations can occur. The lock
is powered by turning the dial briskly in any direction. Simultaneous green
and red flashes display and two beeps sound to indicate that the lock is
powered.