45
Start Timed Lockout
This feature is available in the Model 500 locks. It enables the the Master
User, User 20 , or any Supervisor (if operating in Supervisory/Subordinate
mode) to disable lock access for 1 hour to 255 hours. During this time, the
lock will not accept any keystrokes.
To start an extended time lockout, complete the following steps:
1.
For a PowerStar version of the lock, power the lock by briskly turning
the dial back and forth in both directions.
2.
Press
Enter, Enter
and then
4
. Simultaneous green and red flashes
display.
3.
Enter the Master User, User 20 or Supervisor Combination. Simulta-
neous green and red flashes display.
4.
Enter the one to three-digit number (1-255) that represents the number
of hours for which you would like the lock to be disabled, followed by
the
Enter
key. Simultaneous green and red flashes display.
5.
Enter the number of hours for verification, again followed by the
Enter
key. Simultaneous green and red flashes display.
Summary of Contents for AUDITCON 100 series
Page 1: ...OPERATING INSTRUCTIONS AUDITCON LOCK 100 200 400 500 SERIES...
Page 56: ...52...
Page 57: ...NOTES...
Page 58: ......
