Kaba Mas AUDITCON 100 series, Operating Instructions Manual, Page: 13 / 60

9
Warning: If you do not set the Super Master User PIN before
completing the following activities, all Super Master User
capabilities will be permanently lost.
2. Set Master User PIN (page 22)
3. Set lock operating mode/identify lock for reporting purposes (page 23)
4. Optionally, set delay time (page 24)
5. Optionally, toggle sound on/off (page 26)
6. Optionally, change reporting capabilities for lock personnel (page 26)
To see an example of the activities listed above, go to the Sample Lock
Setup/Operation section.
Lock Startup Operations
Note: Before any startup operations can be performed, the Master
User must complete the activities listed in the previous “Setup
Activities” section.
The following provides a brief list of the operations that should be per-
formed to enable full operation capabilities of the lock. The instructions for
performing these activities are located on the indicated pages.
Master User
1. Add Supervisor(s) or Access User(s) to the lock (page 27)
Note: To add Supervisors, the lock must be operating in Supervisory/
Subordinate mode.
Supervisor(s)
1. Change default PIN (page 30)
Note: If operating in Supervisory/Subordinate Mode, the Supervisor
must also complete the following steps.
2. Add Subordinate User(s) to the lock (page 27)