Kaba Mas AUDITCON 100 series, Operating Instructions Manual

Page: 25 / 60

21
3. Enter 00 followed by the current Super Master User PIN. Simultaneous
green and red flashes display.
4. Enter 00 followed by the new Super Master User PIN. Simultaneous
green and red flashes display.
5. Enter 00 followed by the new Super Master User PIN again for
verification. Simultaneous green and red flashes display.
Permanently Disable Super Master User PIN
There are two methods for permanently disabling the Super Master User
PIN (i.e., the capability to use the Super Master combination is permanently
lost). If the Super Master User PIN has not been set (i.e., the default factory
Super Master User PIN has not been changed) the Super Master User PIN
can be permanently disabled by leaving factory mode without changing the
Super Master User PIN from the default.
If the Super Master User PIN has been set, the Super Master User PIN can
be permanently disabled by completing the following steps:
1. Shelve the lock under normal circumstances by completing Steps 1-5
in the “Shelve Lock” section on page 34.
2. For a PowerStar version of the lock, power the lock by briskly turning
the dial back and forth in both directions.
3. Press Enter and then 0 .
4. Enter 00 followed by the current Super Master User PIN.
5. Enter 00 followed by the default factory PIN 120943 .
6. Enter 00 followed by the default factory PIN 120943 again for verifica-
tion. Simultaneous green and red flashes display. The Super Master
combination capability is lost permanently.