40
Toggle Daylight Savings Time
This feature is available in the Model 500 locks. It enables the Master User,
User 20 , or any Supervisor (if operating in Supervisory/Subordinate mode)
to “toggle” Daylight Savings Time, setting the clock ahead one hour or back
by one hour.
To toggle Daylight Savings Time, complete the following steps:
1.
For a PowerStar version of the lock, power the lock by briskly turning
the dial back and forth in both directions.
2.
Press
Enter, Enter
and then
5
. Simultaneous green and red flashes
display.
3.
Enter the Master User, User 20 or Supervisor Combination. Simulta-
neous green and red flashes display. The clock in the lock will be set
ahead one hour or back one hour depending on what the previous
DST setting was.
4 long green flashes = Moved ahead 1 hour
2 long green flashes = Moved back 1 hour
Note:
This operation will generate an error if changing the clock for
DST also requires a date change. The error will be indicated by
3 red flashes.
Time Delay Override
This feature is available in the Model 500 locks. It enables any one of
Users 90-99 to override a Time Delay while a lock is in a Time Delay
period. The user simply enters his combination. This action causes the lock
to end the Time Delay period and move to the delayed Opening Window.
Users 90-99 can override the Time Delay but they cannot open the lock
after doing so. Only the user who initiated the Time Delay can then open the
lock. If operating in Dual Access Mode, the user who started the delay and
one other valid user can open the lock.
Note:
Users 90-99 cannot open the lock or be added to the lock while
it is in a Time Delay mode.
Summary of Contents for AUDITCON 100 series
Page 1: ...OPERATING INSTRUCTIONS AUDITCON LOCK 100 200 400 500 SERIES...
Page 56: ...52...
Page 57: ...NOTES...
Page 58: ......