![background image](http://html1.mh-extra.com/html/kaba-mas/auditcon-100-series/auditcon-100-series_operating-instructions-manual_3151998017.webp)
13
4.
Enter new User ID
02
. Simultaneous green and red flashes display.
5.
Enter new User ID again for verification. Simultaneous green and red
flashes display.
6.
Enter
00
. Simultaneous green and red flashes display.
IV. Change User PIN
The default PIN assigned to the new User ID you just added is “502550”.
You must change this default PIN before the User combination (User ID +
PIN) can be used to open the lock. Change the User PIN to “000000” by
completing the following:
1.
For a PowerStar version of the lock, power the lock by briskly turning
the dial back and forth in both directions.
2.
Press
Enter
and then
1
. Simultaneous green and red flashes display.
3.
Enter User combination (User ID + default User PIN)
02502550
.
Simultaneous green and red flashes display.
4.
Enter new User combination (User ID + new PIN)
02000000
. Simulta-
neous green and red flashes display.
5.
Enter new User combination again for verification. Simultaneous green
and red flashes display.
V. Open Lock/Container
Now open the lock using the new User combination by completing the
following:
1.
For a PowerStar version of the lock, power the lock by briskly turning
the dial back and forth in both directions.
2.
If this is a Spindled version of the lock, position the lock dial to the
HOME
position (i.e., the lip on the dial will cover the red “open lock”
indicator)
and
3.
Enter User combination
02000000
. If the combination is entered
successfully, the lock will respond as follows to indicate that the lock is
ready to open:
Summary of Contents for AUDITCON 100 series
Page 1: ...OPERATING INSTRUCTIONS AUDITCON LOCK 100 200 400 500 SERIES...
Page 56: ...52...
Page 57: ...NOTES...
Page 58: ......