39
10. If operating a Model 500, enter the two-digit number that represents the
day of the week (e.g., enter “01” for Sunday, “02” for Monday, etc.).
Simultaneous green and red flashes display.
11. If operating a Model 500, enter the two-digit number that represents the
day of the week again for verification. Simultaneous green and red
flashes display.
Set Lock Time
This feature is available in the Model 400 and 500 locks. It enables the
Master User to set the time in the lock.
Note:
Only the Master User can set the time in the lock.
To set the lock time, complete the following steps:
1.
For a PowerStar version of the lock, power the lock by briskly turning
the dial back and forth in both directions.
2.
Press
Enter
and then
7
. Simultaneous green and red flashes display.
3.
Enter the Master User Combination. Simultaneous green and red
flashes display.
4.
Enter the two-digit number that represents the hour (00-23). Simulta-
neous green and red flashes display.
5.
Enter the two-digit number that represents the hour again for verifica-
tion. Simultaneous green and red flashes display.
6.
Enter the two-digit number that represents the minute(s) (00-59).
Simultaneous green and red flashes display.
7.
Enter the two-digit number that represents the minute(s) again for
verification. Simultaneous green and red flashes display.
Note:
It is recommended that you reset the time periodically in the
Model 400 and 500 locks as there may be some drifting in the
lock clock, up to 15 minutes per year.
Summary of Contents for AUDITCON 100 series
Page 1: ...OPERATING INSTRUCTIONS AUDITCON LOCK 100 200 400 500 SERIES...
Page 56: ...52...
Page 57: ...NOTES...
Page 58: ......
