19
Super Master User Lock Operations
The lock is shipped with a default factory Super Master User PIN that can be
set (i.e., changed) when the lock is in factory or shelf mode. Once the Super
Master User PIN is set, the Super Master User combination can be used to
shelve the lock in the event that the Master User combination is lost.
Set Super Master User PIN
Note:
The default factory PIN assigned to the Super Master User is
“120943”. When the lock is in factory or shelve mode, this default
PIN must be changed before the Super Master User combination
can be used to shelve the lock.
To change the default factory Super Master User PIN, complete the follow-
ing steps:
1.
Ensure that the lock is in factory mode or shelve mode.
2.
For a PowerStar version of the lock, power the lock by briskly turning
the dial back and forth in both directions.
3.
Press
Enter
and then
0
. Simultaneous green and red flashes display.
4.
Enter the two-digit Super Master ID
00
followed by the Super Master
User PIN “120943.” Simultaneous green and red flashes display.
5.
Enter the two-digit Super Master ID
00
followed by any six-digit PIN
other than “120943”. Simultaneous green and red flashes display.
6.
Enter the two-digit Super Master ID
00
followed by the new six-digit PIN
entered in Step 5 again for verification. The new Super Master User
combination is now set.
Note:
A Super Master User PIN can be changed any time while the
lock is in shelved mode. Refer to “Change Super Master User
PIN” for more detail. Once set, the Super Master User PIN will
continue to be valid (even if the lock is shelved) until the Super
Master User PIN is disabled. Refer to “Permanently Disable
Super Master User PIN” for more detail.
Summary of Contents for AUDITCON 100 series
Page 1: ...OPERATING INSTRUCTIONS AUDITCON LOCK 100 200 400 500 SERIES...
Page 56: ...52...
Page 57: ...NOTES...
Page 58: ......
