12
II. Set Lock Operating Mode
For more detail on lock operating/access modes, refer to pages 1-2 in this
guide. For this example, set the lock to operate in Independent operating
mode and Single User access (i.e., only one combination is required to
open the lock) by completing the following:
1.
For a PowerStar version of the lock, power the lock by briskly turning
the dial back and forth in both directions.
2.
Press
Enter
and then
2
. Simultaneous green and red flashes display.
3.
Enter Master User combination
00123456
. Simultaneous green and
red flashes display.
4.
Enter
01
for Single User access. Simultaneous green and red flashes
display.
5.
Enter
01
again to verify Single User access. Simultaneous green and
red flashes display.
6.
Enter
01
for Independent mode. Simultaneous green and red flashes
display.
7.
Enter
01
again to verify Independent mode. Simultaneous green and
red flashes display.
8.
Enter a two-digit number (01-99) to identify the lock in all audit
records. If you do not want to assign an identification number to the
lock, enter
00
. Simultaneous green and red flashes display.
9.
If you entered a two-digit number other than “00” in Step 7, enter the
number again for verification. Simultaneous green and red flashes
display.
III. Add User
Now add one User to the lock, having a User ID of “02” by completing the
following:
1.
For a PowerStar version of the lock, power the lock by briskly turning
the dial back and forth in both directions.
2.
Press
Enter
and then
3
. Simultaneous green and red flashes display.
3.
Enter Master User combination
00123456
. Simultaneous green and
red flashes display.
Summary of Contents for AUDITCON 100 series
Page 1: ...OPERATING INSTRUCTIONS AUDITCON LOCK 100 200 400 500 SERIES...
Page 56: ...52...
Page 57: ...NOTES...
Page 58: ......
