22
Standard Model Lock Operations
This section covers those lock operations which are available for all
Auditcon Series lock models.
Set Master User PIN
Warning:
A Super Master PIN can be set and then used to shelve
the lock in the event that the Master User combination is lost.
If you do not set the Super Master User PIN prior to setting
the Master User PIN, all Super Master User capabilities will
be permanently lost. Refer to “Set Super Master User PIN”
on page 19 for more detailed information.
Note:
The default PIN assigned to the Master User is “120943”. The
Master User must change this default PIN before any lock
operations can be performed. Refer to the following for instruc-
tions on changing the default Master User PIN.
Once you have successfully opened the lock using the factory PIN, the
Master User must change the default Master User PIN by completing the
following steps:
1.
For a PowerStar version of the lock, power the lock by briskly turning
the dial back and forth in both directions.
2.
Press
Enter
and then
1
. Simultaneous green and red flashes display.
3.
Enter the two-digit Master ID
00
followed by the default Master User
PIN
120943
. Simultaneous green and red flashes display.
4.
Enter the two-digit Master ID
00
followed by the new Master User PIN.
Simultaneous green and red flashes display.
5.
Enter the two-digit Master ID
00
followed by the new Master User PIN
again for verification. Simultaneous green and red flashes display.
Summary of Contents for AUDITCON 100 series
Page 1: ...OPERATING INSTRUCTIONS AUDITCON LOCK 100 200 400 500 SERIES...
Page 56: ...52...
Page 57: ...NOTES...
Page 58: ......
