14
Spindled PowerStar
- 1 slow green flash
Spindled PowerSaver
- Continuous green flashes for approx. 5
seconds
Non-Spindled PowerStar
- Continuous green flashes for approx. 5
seconds
Non-Spindled PowerSaver
- Continuous green flashes for approx. 5
seconds
4.
For a
Spindled
version of the lock, dial right (clockwise) until the lock
bolt is retracted and then open the container. If you have a
Spring Bolt
,
you must dial right and hold the dial until the container has been
opened so that the bolt does not “spring” back into the extended
position. For a
Non-Spindled
version of the lock, disengage the
container boltworks to unlock the lock and open the container simulta-
neously.
VI. Close Lock/Container
How the lock and container are closed is dependent on whether the lock is
Spindled or Non-Spindled and on the type of bolt that is installed .
Spindled Locks:
For a
Standard Deadbolt
close the container and then lock the lock by
dialing left (counter-clockwise) to extend the bolt.
For a
Snap Bolt
close the container and extend the container boltworks to
the locked position. The lock bolt will automatically lock in conjunction with
the boltworks.
For a
Spring Bolt
close the container. The lock will automatically lock.
Non-Spindled Locks:
For a
Slide Bolt
close the container and extend the container boltworks to
the locked position. The lock bolt will automatically lock in conjunction with
the boltworks.
Summary of Contents for AUDITCON 100 series
Page 1: ...OPERATING INSTRUCTIONS AUDITCON LOCK 100 200 400 500 SERIES...
Page 56: ...52...
Page 57: ...NOTES...
Page 58: ......
