Juniper SRX3400, Hardware Manual, Page: 67 / 232

Related
Documentation
SRX3400 Services Gateway Definition of Safety Warning Levels on page 139
•
•
Preparing the SRX3400 Services Gateway for Rack-Mount or Cabinet Installation on
page 51
•
Installing the SRX3400 Services Gateway in a Rack or Cabinet Using a Mechanical Lift
on page 53
Installing the SRX3400 Services Gateway in a Rack or Cabinet Using a Mechanical Lift
1.
Ensure the rack is in its permanent location and is secured to the building. Ensure that
the installation site allows adequate clearance for both airflow and maintenance. For
details, see
“Site Preparation Checklist for the SRX3400 Services Gateway” on page 37 .
2.
Load the services gateway onto the lift, making sure it rests securely on the lift platform
(see
Figure 26 on page 53 ).
Figure 26: Load the Services Gateway onto the Lift
0
1
23 4
g030261
3.
Using the lift, position the services gateway in the rack:
• For two-post rack mounting, align the bottom hole in each mounting bracket with
a hole in each rack rail.
•
For four-post rack or cabinet mounting, position the services gateway so that the
bottom rear edge of the chassis rests on the support shelf you installed earlier, as
described in
“Installing the Mounting Hardware for the SRX3400 Services Gateway”
on page 51 .
53 Copyright © 2013, Juniper Networks, Inc.
Chapter 5: Installing the SRX3400 Services Gateway