Juniper SRX3400, Hardware Manual, Page: 190 / 232

and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Related
Documentation
SRX3400 Services Gateway Agency Approvals on page 174
•
•
In Case of Electrical Accident on page 163
•
General Electrical Safety Guidelines and Warnings on page 163
•
DC Power Electrical Safety Guidelines and Warnings on page 168
SRX3400 Services Gateway NEBS and ETSI Compliance
•
SRX3400 Services Gateway NEBS and ETSI Standards on page 176
•
SRX3400 Services Gateway NEBS and ETSI Configuration Requirements on page 176
SRX3400 Services Gateway NEBS and ETSI Standards
The SRX3400 Services Gateway, when it is installed and configured as described in this
section, meets the following NEBS and ETSI standards:
• GR-63-CORE
• ETSI 300019-2-1
•
ETSI 300019-2-2
•
ETSI 300019-2-3
• GR-1089-CORE
SRX3400 Services Gateway NEBS and ETSI Configuration Requirements
To meet the NEBS and ETSI standards described in “SRX3400 Services Gateway NEBS
and ETSI Standards” on page 176 , the SRX3400 Services Gateway must be configured
as follows:
•
The services gateway must be installed in an open two-post or four-post rack, and not
in an enclosed cabinet.
• The services gateway must be installed in accordance with the instructions and
procedures in this guide.
•
The services gateway must be equipped with two power supplies.
•
For AC-powered services gateways, both power supplies installed in the services
gateway must be Revision 09 or later. You can determine the power supply version
numbers by using the
show chassis hardware command. You can also identify the
power supply version by referring to the printed label on the power supply, which shows
the version in an alphabetic format. Revision 09 corresponds to “REV 0F,” Revision 10
corresponds to “REV 0G,” and so on.
Figure 70 on page 177 shows the location of the
power supply model and revision label.
Copyright © 2013, Juniper Networks, Inc. 176
SRX3400 Services Gateway Hardware Guide