Juniper SRX3400, Hardware Manual, Page: 61 / 232

8.
Save the shipping carton and packing materials in case you need to move or ship the
services gateway at a later time.
9.
To proceed with the installation, see “Installing the SRX3400 Services Gateway in a
Rack or Cabinet Using a Mechanical Lift” on page 53 .
Related
Documentation
Required Tools and Parts for Unpacking the SRX3400 Services Gateway on page 45
•
•
Verifying Parts Received with the SRX3400 Services Gateway on page 47
Verifying Parts Received with the SRX3400 Services Gateway
A packing list is included in each shipment. Check the parts in the shipment against the
items on the packing list. The packing list specifies the part numbers and descriptions of
each part in your order. Note that feature and service cards are shipped in separate boxes
from the chassis.
If any part is missing, contact a customer service representative.
A fully configured services gateway contains the chassis with installed components,
listed in
Table 18 on page 47 , and an accessory box, which contains the parts listed in
Table 19 on page 48 . The parts shipped with your services gateway can vary depending
on the configuration you ordered.
Table 18: Parts List for a Fully Configured SRX3400 Services Gateway
Quantity Component
1 Chassis, including midplane, and rack-mounting
brackets
Up to 4 IOCs
Up to 6 NP-IOCs
At least one, and up to 4 SPCs
At least one, and up to 2 NPCs
1 Routing Engine
0 or 1 SCM
1 SFB
At least 1 and up to 2 Power supplies
1 Fan tray
1 Air filter
47 Copyright © 2013, Juniper Networks, Inc.
Chapter 4: Unpacking the SRX3400 Services Gateway