Juniper SRX3400, Hardware Manual, Page: 167 / 232

•
Chassis Lifting Guidelines on page 148
•
Installation Instructions Warning on page 148
•
Ramp Warning on page 153
Ramp Warning
WARNING: When installing the services gateway, do not use a ramp inclined
at more than 10 degrees.
Waarschuwing Gebruik een oprijplaat niet onder een hoek van meer dan 10
graden.
Varoitus Älä käytä sellaista kaltevaa pintaa, jonka kaltevuus ylittää 10 astetta.
Attention Ne pas utiliser une rampe dont l'inclinaison est supérieure à 10
degrés.
Warnung Keine Rampen mit einer Neigung von mehr als 10 Grad verwenden.
Avvertenza Non usare una rampa con pendenza superiore a 10 gradi.
Advarsel Bruk aldri en rampe som heller mer enn 10 grader.
Aviso Não utilize uma rampa com uma inclinação superior a 10 graus.
¡Atención! No usar una rampa inclinada más de 10 grados
Varning! Använd inte ramp med en lutning på mer än 10 grader.
Related
Documentation
SRX3400 Services Gateway General Safety Guidelines and Warnings on page 141
•
•
Chassis Lifting Guidelines on page 148
•
Installation Instructions Warning on page 148
•
Rack-Mounting Requirements and Warnings on page 149
SRX3400 Services Gateway Laser and LED Safety Guidelines and Warnings
This section includes the following topics:
• General Laser Safety Guidelines on page 154
• Class 1 Laser Product Warning on page 154
•
Class 1 LED Product Warning on page 155
•
Laser Beam Warning on page 155
• Radiation from Open Port Apertures Warning on page 156
153 Copyright © 2013, Juniper Networks, Inc.
Appendix A: Safety and Regulatory Compliance Information