Juniper SRX3400, Hardware Manual, Page: 119 / 232

Related
Documentation
Troubleshooting with the CLI on the SRX3400 Services Gateway on page 99
•
•
Troubleshooting the Cooling System on the SRX3400 Services Gateway on page 101
•
Troubleshooting I/O Cards on the SRX3400 Services Gateway on page 102
•
Troubleshooting Services Processing Cards on the SRX3400 Services Gateway on
page 105
•
Troubleshooting the Power System on the SRX3400 Services Gateway on page 106
Troubleshooting SPCs on the SRX3400 Services Gateway
To troubleshoot an SPC, follow these guidelines:
•
Make sure the SPC is properly seated in the midplane and its screws are tightened.
• Issue the CLI show chassis fpc command to check the status of installed SPCs. As
shown in the sample output, the value Online in the column labeled State indicates
that an SPC in slot 2 is functioning normally:
user@host> show chassis fpc
Temp CPU Utilization (%) Memory Utilization (%)
Slot State (C) Total Interrupt DRAM (MB) Heap Buffer
1 Empty 41 9 0 1024 15 57
2 Online 43 5 0 1024 16 57
3 Online 43 11 0 1024 16 57
4 Empty
5 Empty
6 Online 42 6 0 1024 16 57
For more detailed output, add the
detail
option. The following example does not specify
a slot number, which is optional:
user@host> show chassis fpc detail
Slot 2 information:
State Online
Temperature 43 degrees C / 109 degrees F
Total CPU DRAM 1024 MB
Total RLDRAM 256 MB
Total DDR DRAM 4096 MB
Start time: 2007-07-10 12:28:38 PDT
Uptime: 1 hour, 33 minutes, 47 seconds
Slot 3 information:
State Online
Temperature 43 degrees C / 109 degrees F
Total CPU DRAM 1024 MB
Total RLDRAM 256 MB
Total DDR DRAM 4096 MB
Start time: 2007-07-10 12:28:40 PDT
Uptime: 1 hour, 33 minutes, 45 seconds
Slot 6 information:
State Online
Temperature 42 degrees C / 107 degrees F
Total CPU DRAM 1024 MB
Total RLDRAM 256 MB
Total DDR DRAM 4096 MB
Start time: 2007-07-10 12:28:42 PDT
105 Copyright © 2013, Juniper Networks, Inc.
Chapter 11: Troubleshooting the SRX3400 Services Gateway