Juniper JUNOSE 11.0, Command Reference Manual

Page: 810 / 1486

ip dvmrp accept-filter
Syntax
[ no ] ip dvmrp accept-filter listName1 [ distance ] neighbor-list listName2
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Filters incoming DVMRP reports in accordance with a standard IP access list. The
no version disables the filter.
Options
listName1 —Name of the IP access list. If the name is 0, the interface accepts all
destinations. You can specify a simple or extended access list; with an extended
access list you can specify an address and a subnet mask.
■
■
distance —Number in the range 0–255; default value is 0; the distance associated
with the DVMRP route when the router determines the RPF interface for the
source of a multicast packet
■
listName2 —Name of an access list containing the neighbors from which the
router will accept reports. If the name is 0, the interface accepts destinations
from all its neighbors.
Mode
Interface Configuration
768 ■
ip dvmrp accept-filter
JUNOSe 11.0.x Command Reference Guide A to M