Juniper JUNOSE 11.0, Command Reference Manual

Page: 701 / 1486

group
Syntax
To specify a group scheduler node for QoS:
[ no ] typeOfInterface group groupName scheduler-profile schedulerProfileName
To specify a Diffie-Hellman group:
group { 1 | 2 | 5 }
no group
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
From QoS Profile Configuration mode, specifies that a group scheduler node be
configured for each interface of the given interface type. The
no version removes
this rule from the QoS profile.
From IKE Policy Configuration mode, assigns a Diffie-Hellman group to the IKE policy.
The
no version restores the default, 1024-bit Diffie-Hellman group.
Options
■
typeOfInterface —Interface types for group scheduler nodes to be configured:
atm, ethernet, serial, server-port
■
groupName —Name of the traffic class group
■
schedulerProfileName— Name of the scheduler profile
■
1—Specifies the 768-bit group
■
2—Specifies the 1024-bit group
■
5—Specifies the 1536-bit group
Mode
IKE Policy Configuration, QoS Profile Configuration
Related Topics
■
Configuring a QoS Profile
■
Configuring Shadow Nodes
■
Configuring QoS for an L2TP Session
■
Configuring QoS for Tunnel-Server Ports for L2TP LNS Sessions
group
■ 659
Chapter 8: G Commands