Juniper JUNOSE 11.0, Command Reference Manual

Page: 379 / 1486

bulkstats interface-type
Syntax
[ no ] bulkstats interface-type interfaceType [ interfaceSpecifier ]*
[ collector collectorIndex ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
mplsL2shim , mplsMajor , and mplsMinor keywords added in JUNOSe Release 8.2.0.
Description
Configures the interface type on which you want to collect statistics. The no version
deletes the interface type from bulkstats collection.
Options
■
interfaceType —One of the following interface types for which you can collect
statistics: ATM, ATM 1483, Ethernet, Frame Relay, Frame Relay subinterface,
Cisco HDLC, IP, MPLS minor, MPLS major, MPLS shim, PPP, VLAN subinterface
■
interfaceSpecifier— Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
■
*—Indicates that one or more parameters can be repeated multiple times in a
list in the command line
■
collectorIndex— Number in the range 1–65535 that identifies the particular data
collector. Always specify this option if you defined more than one collector.
Mode
Global Configuration
bulkstats interface-type
■ 337
Chapter 3: B Commands