Juniper JUNOSE 11.0, Command Reference Manual

Page: 895 / 1486

ip nat
Syntax
[ no ] ip nat { inside | outside }
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Marks interfaces that participate in NAT translation as residing on the inside or the
outside network. The
no version unmarks the interface so that it does not participate
in NAT translation.
Options
inside —S pecifies that the interface resides on the inside (private) portion of the
network. The inside portion of the network uses nonroutable IP addresses.
■
■
outside—Specifies that the interface resides on the outside (public) portion of
the network. The outside portion of the network (for example, the Internet) uses
routable legitimate addresses.
Mode
Interface Configuration, Profile Configuration
ip nat
■ 853
Chapter 10: I Commands