Juniper JUNOSE 11.0, Command Reference Manual

Page: 1304 / 1486

match ip address
Syntax
match ip address { accessListName [ accessListName ]* |
prefix-list prefixListName [ prefixListName ]* | prefix-tree treeName [ treeName ]* }
no match ip address [ accessListName ]* | prefix-list [ prefixListName ]* |
prefix-tree [ treeName ]*
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Matches any routes that have a destination network number address that is permitted
by a standard or extended access list, a prefix list, or a prefix tree, or performs policy
routing on packets. You cannot mix references in the same match command; you
can only specify either access list(s), prefix list(s), or prefix tree(s). The
no version
removes the match clause from a route map unless you specify a value, in which
case only that value is removed from the match clause.
Options
■
accessListName— String of up to 32 alphanumeric characters
■
prefixListName— Name of a single prefix list; string of up to 32 characters
■
treeName— Name of a single prefix tree; string of up to 32 characters
■
*—Indicates that one or more parameters can be repeated multiple times in a
list in the command line
Mode
Policy List Configuration, Route Map Configuration
1262 ■
match ip address
JUNOSe 11.0.x Command Reference Guide A to M