Juniper JUNOSE 11.0, Command Reference Manual

Page: 954 / 1486

■
last-resort—Installs the static route in the routing table even if the specified RTR
operation is currently unreachable, provided that no other static route to the
same network prefix is available
■
verify bfd-liveness-detection—Installs the static route in the routing table only if
the next hop to the specified destination address is verifiable by means of BFD
liveness detection
■
minInterval —Minimum proposed transmit interval and required receive interval
for BFD control packets; has the same effect as configuring the minimum receive
interval and the minimum transmit interval to the same value; number in the
range 100–65535 milliseconds—for ES2 4G LM only, the range is 10–65535
milliseconds; default value is 300 milliseconds
■
minRecInterval —Minimum interval at which the local peer must receive BFD
control packets sent by the remote peer; number in the range 100–65535
milliseconds—for ES2 4G LM only, the range is 10–65535 milliseconds; default
value is 300 milliseconds
■
minTransInterval —Minimum proposed interval between BFD control packets
sent by the local peer; number in the range 100–65535 milliseconds—for ES2
4G LM only, the range is 10–65535 milliseconds; default value is 300 milliseconds
■
multValue —Detection multiplier value that the remote peer router multiplies by
the local peer's negotiated transmit interval to determine the remote peer's BFD
liveness detection interval; equal to the number of BFD packets that can be
missed before the BFD session is declared down; number in the range 1–255;
default value is 3
Mode
Global Configuration, VRF Configuration
912 ■
ip route
JUNOSe 11.0.x Command Reference Guide A to M