Juniper JUNOSE 11.0, Command Reference Manual

Page: 568 / 1486

distance
Syntax
The options available vary depending on your routing protocol context; that is, on
whether you are configuring OSPF or RIP.
For OSPF:
[ no ] distance { ospfWeight | ospf { external distExt | inter-area disInter | intra-area
disIntra } [ external distExt | inter-area distInter | intra-area distIntra ]* }
For RIP:
[ no ] distance ripWeight
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Defines an administrative distance for RIP or OSPF routes. A distance of 255 prevents
the route from being installed in the routing table. The
no version either negates a
command or restores the command's defaults.
Options
■
distance—Weight applied to OSPF routes
■
ospfWeight —Value assigned to OSPF routes that are added to the IP routing table;
a number in the range 1–255
■
ospf—OSPF routes
■
distExt —Distance for external type 5 and type 7 routes; a number in the range
1–255
■
disInter —Distance for interarea routes; a number in the range 1–255
■
disIntra —Distance for intra-area routes; a number in the range 1–255
■
*—Indicates that one or more parameters can be repeated multiple times in a
list in the command line
■
ripWeight— Administrative distance assigned to RIP routes added to the IP routing
table in the range 0–255; default value is 120
Mode
Address Family Configuration (RIP), Router Configuration (OSPF or RIP)
526 ■
distance
JUNOSe 11.0.x Command Reference Guide A to M