Juniper JUNOSE 11.0, Command Reference Manual

Page: 1302 / 1486

match distance
Syntax
match distance distance [ distance ]*
no match distance [ distance ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Matches any routes that have the specified administrative distance. The no version
removes the match clause from a route map unless you specify a value, in which
case only that value is removed from the match clause.
NOTE: Matching a distance is useful only when applied to a route being redistributed
out of a routing table. Distance is used to determine the relative preference between
routes to the same prefix in order to pick the best route to that prefix in the routing
table. Distance has no meaning in any other circumstance and any attempt to match
distance will fail.
Options
distance— Administrative distance in the range 0–255
■
■
*—Indicates that one or more parameters can be repeated multiple times in a
list in the command line
Mode
Policy List Configuration, Route Map Configuration
1260 ■
match distance
JUNOSe 11.0.x Command Reference Guide A to M