Juniper JUNOSE 11.0, Command Reference Manual

Page: 469 / 1486

clear mpls ldp
Syntax
clear mpls ldp [ prefix destAddr [ maskLen | mask ] | neighbor [ neighborAddress ] ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Removes and reestablishes existing LDP LSPs, thereby forcing the reapplication of
policies on the reestablished topology-driven LDP LSPs. You can clear all LDP LSPs
or limit the clearance to only LSPs to a specified prefix or neighbor. Affects the data
traffic on LSPs that are in use when the command is issued. There is no
no version.
Options
■
destAddr —IP address of the prefix to be cleared
■
maskLen —Length of the prefix to be cleared; number in the range 0–32
■
mask —Mask for the prefix to be cleared
■
neighborAddress —IP address of a neighbor 32-bit dotted-decimal format of the
entry to be cleared
Mode
Privileged Exec
clear mpls ldp
■ 427
Chapter 4: C Commands