Juniper JUNOSE 11.0, Command Reference Manual

Page: 522 / 1486

debug ip bgp
Syntax
debug ip bgp [ in | out ] [ peerAddress [ peerAddressMask ] ] [ bgpLog ]
[ router routerName ] [ filtering-router filteringRouterName ] [ accessClassName ]
[ route-map mapName ] [ severity { severityValue | severityNumber } ]
[ verbosity verbosityLevel ] [ secondary ]
no debug ip bgp [ in | out ] [ peerAddress [ peerAddressMask ] ] [ bgpLog ]
[ router routerName ] [ filtering-router filteringRouterName ] [ accessClassName ]
[ route-map mapName ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Shows information about the selected variable. The no version disables the display.
Options
■
in—Displays information for inbound events
■
out—Displays information for outbound events
■
peerAddress —IP address of BGP peer for which information is displayed
■
peerAddressMask —Network mask of BGP peer for which information is displayed
■
bgpLog— BGP log of interest; one of the following options:
■
dampening—BGP dampening event; route is suppressed or no longer
suppressed by route-flap dampening
■
events—BGP finite state machine events and transitions
■
keepalives—BGP keepalive message events
■
next-hops—BGP next hop events
■
updates—BGP routing table update events
■
routerName— Name of the virtual router that owns the BGP router for which
information is being displayed
■
filteringRouterName —Name of the virtual router that owns the access class and
route map parameters
■
accessClassName— Name of an access list to filter output
■
mapName— Name of a route map to filter output
■
severity—Specifies the minimum severity of the log messages displayed for the
selected category; described either by a descriptive term—
severityValue —or by
a corresponding number— severityNumber —in the range 0–7; the lower the
number, the higher the priority:
■
emergency or 0—System unusable
■
alert or 1—Immediate action needed
■
critical or 2—Critical condition exists
480 ■
debug ip bgp
JUNOSe 11.0.x Command Reference Guide A to M