Juniper JUNOSE 11.0, Command Reference Manual

Page: 414 / 1486

clear bridge interface
Syntax
clear bridge interface interfaceType interfaceSpecifier
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Removes from the forwarding table all dynamic (learned) MAC address entries for
a specified network interface that belongs to a bridge group or to a VPLS instance .
There is no
no version.
NOTE: Using the clear bridge interface command for a VPLS instance affects the
specified network interface associated with the VPLS instance, but has no effect on
the VPLS virtual core interface, which represents all of the MPLS tunnels from the
router to the remote VPLS edge (VE) devices. To remove all MAC addresses from the
forwarding table for the VPLS virtual core interface, use the
clear bridge interface
vpls command.
Options
interfaceType —One of the following interface types listed in “Interface Types
and Specifiers” on page 5
■
■
atm
■
fastEthernet
■
gigabitEthernet
■
tenGigabitEthernet
■
interfaceSpecifier— Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
Mode
Privileged Exec
Related Topics
■
Clearing Dynamic MAC Addresses from the VPLS Forwarding Table in the JUNOSe
BGP and MPLS Configuration Guide
372 ■
clear bridge interface
JUNOSe 11.0.x Command Reference Guide A to M