Juniper JUNOSE 11.0, Command Reference Manual

Page: 1380 / 1486

mpls ldp egress-label
Syntax
mpls ldp egress-label { explicit-null | non-null }
no mpls ldp egress-label
Release Information
Command introduced in JUNOSe Release 8.1.0.
Description
Configures LDP to advertise the explicit null label (label 0) or a non-null label for the
LSR that is the egress router for the prefix. This command takes effect immediately.
The
no version restores the default, where the egress router advertises the implicit
null label (label 3), which causes the router's upstream neighbor to perform a
penultimate hop pop.
Mode
Global Configuration
1338 ■
mpls ldp egress-label
JUNOSe 11.0.x Command Reference Guide A to M