Juniper JUNOSE 11.0, Command Reference Manual

Page: 50 / 1486

Table 3: Interface Types and Specifiers for ERX7xx Models, ERX14xx Models, and
ERX310 Router
(continued)
Example Interface Specifier Description Interface Type
gigabitEthernet
3/0.6.20 slot / port [. subinterface1 [. subinterface2 ] ]
■
slot —Number of the chassis slot in the
range 0–6 (ERX7xx models), 0–13
(ERX14xx models), and 0–2 (ERX310
router)
■
port —Port number on the I/O module
The meaning of the subinterface variables
depends on the configuration context. You
can configure Gigabit Ethernet interfaces
with or without VLANs.
■
VLANs:
■
subinterface1 —Number of the
VLAN subinterface in the range
1–2147483647; no more than
4096 VLAN subinterfaces per
Gigabit Ethernet physical port
■
subinterface2 —When using
PPPoE, the number of the PPPoE
subinterface in the range
1–2147483647; no more than
8000 PPPoE subinterfaces per
Gigabit Ethernet line module
■
No VLANs:
■
subinterface1 —When using
PPPoE, the number of the PPPoE
subinterface in the range
1–2147483647; no more than
8000 PPPoE subinterfaces per
Gigabit Ethernet line module
■
subinterface2 —Not used
IEEE 802.3
Gigabit
Ethernet
(GE)
interface gigabitEthernet
lag paris.2 bundle-name [. subinterface ]
■
bundle-name —Name of the bundle
■
subinterface —Number of the LAG
subinterface in the range
1–2147483647
IEEE
802.3ad link
aggregation
group (LAG)
interface lag
loopback 20 integer
■
integer —Integer in the range
1–4294967293
Loopback
interface loopback
mlframe-relay
boston.1 bundle-name [. subinterface ]
■
bundle-name —Name of the bundle
■
subinterface —Number of the MLFR
subinterface in the range
1–4294967293
Multilink
frame relay
interface mlframe-relay
8 ■
Interface Types and Specifiers
JUNOSe 11.0.x Command Reference Guide A to M