Juniper JUNOSE 11.0, Command Reference Manual

Page: 1255 / 1486

load-rebalance
Syntax
[ no ] load-rebalance [ period rebalancePeriod start-threshold rebalanceStartThreshold
[ percent | subscribers ] stop-threshold rebalanceStopThreshold
[ percent | subscribers ] maximum-improvement rebalanceMaximumImprovement
[ percent | subscribers ] ]
Release Information
Command introduced in JUNOSe Release 8.1.0.
Description
Configures the QoS algorithm for rebalancing the links in an 802.3ad link aggregation
group (LAG). To configure the algorithm to dynamically rebalance the LAG using
existing parameters, issue the
load-rebalance command without any keywords. The
no version restores the default parameters.
Options
■
rebalancePeriod —Time period for rebalancing in seconds; in the range 0–86400;
the default is 60 seconds
■
rebalanceStartThreshold —Amount of imbalance in the LAG that triggers the
algorithm to start rebalancing; the default is 0 percent
■
percent—Specifies that the threshold is measured as a percentage of the
average load per link; in the range 0–100
■
subscribers—Specifies that the threshold is measured by the number of
subscribers away from the average subscriber count per link in the LAG; in
the range 0–100000
■
rebalanceStopThreshold —Amount of imbalance in the LAG that triggers the
algorithm to stop rebalancing; the default is 0 percent
■
percent—Specifies that the amount of imbalance is measured as a percentage
of the average load per link; in the range 0–100
■
subscribers—Specifies that the threshold is measured by the number of
subscribers away from the average subscriber count link in the LAG; in the
range 0–100000
■
rebalanceMaximumImprovement —Maximum number of links in the LAG to
rebalance; the default is 100 percent
■
percent—Specifies that the maximum number of links is measured as a
percentage of the total links; in the range 0–100
■
subscribers—Specifies that the maximum number of links is measured by
the number of subscribers; in the range 0–100000
Mode
Interface Configuration
Related Topics
■
Configuring Load Rebalancing for 802.3ad Link Aggregation Groups
load-rebalance
■ 1213
Chapter 12: L Commands