Juniper JUNOSE 11.0, Command Reference Manual

Page: 505 / 1486

copy
Syntax
copy [ sourcePath ] sourceFilename [ destinationPath ] destinationFilename [ force ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
hostName and deviceName variables added in JUNOSe Release 7.2.0.
Description
Copies a local or network file. There is no no version.
NOTE: You cannot change the extension of a file, for example, from .mac to .scr.
You can copy software release (.rel) files only to the router (download); you cannot
copy them from the router (upload). See Copying and Redirecting Files in the JUNOSe
System Basics Configuration Guide , for detailed information on file type usage with
the copy command.
Options
■
sourcePath—Path to the source in the format:
hostName : | deviceName : | /incoming/ subdirectory / | /outgoing/ subdirectory /
■
hostName :—Name of the network host
■
deviceName :—Name of the device specifying a flash card slot
■
disk0—Specifies flash card slot 0 on the primary SRP module; if no device
is specified for the primary SRP module, then disk0 is used
■
disk1—Specifies flash card slot 1 on the primary SRP module; source and
destination file types must be .dmp; supported only on the E120 and E320
routers
■
standby—Specifies flash card slot 0 on the standby SRP module for backward
compatibility
■
standby-disk0—Specifies flash card slot 0 on the standby SRP module
■
standby-disk1—Specifies flash card slot 1 on the standby SRP module; source
and destination file types must be .dmp; supported only on the E120 and
E320 routers
■
incoming—Specifies the router's incoming FTP directory
■
subdirectory —Name of a subdirectory on the router's FTP server. If the
subdirectory does not exist, the router creates it.
■
outgoing—Specifies the router's outgoing FTP directory
■
sourceFilename —Name of the the source file
■
destinationPath—Path to the destination in the format:
networkPath | /incoming/ subdirectory | /outgoing/ subdirectory
copy
■ 463
Chapter 4: C Commands