Juniper JUNOSE 11.0, Command Reference Manual

Page: 263 / 1486

baseline bridge interface vpls
Syntax
baseline bridge interface vpls vplsName
Release Information
Command introduced in JUNOSe Release 7.1.0.
Description
Sets a statistics baseline for a VPLS instance on the VPLS virtual core interface, which
represents all of the MPLS tunnels from the router to the remote VPLS edge (VE)
devices. The router implements the baseline by reading and storing the statistics at
the time the baseline is set and then subtracting this baseline whenever
baseline-relative statistics are retrieved. There is no
no version.
NOTE: Using the baseline bridge interface vpls command affects the VPLS virtual
core interface, but has no effect on the network interfaces associated with the VPLS
instance. To set a statistics baseline for a VPLS network interface, use the
baseline
bridge interface command.
Options
■
vplsName —Name of a VPLS instance created with the bridge vpls
transport-virtual-router command
Mode
Privileged Exec
Related Topics
■
Setting a Baseline for VPLS Statistics in the JUNOSe BGP and MPLS Configuration
Guide
baseline bridge interface vpls
■ 221
Chapter 3: B Commands