Juniper JUNOSE 11.0, Command Reference Manual

Page: 1445 / 1486

mpls topology-driven-lsp ip-interfaces
Syntax
[ no ] mpls topology-driven-lsp ip-interfaces [ egress | ingress ]
[ { access-list | prefix-list }
listName ] [ host-only ]
no mpls topology-driven-lsp ip-interfaces [ egress | ingress ] [ host-only ]
[ policy-list ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Specifies LSPs to be put into the IP routing table for forwarding plain IP traffic. The
no version removes the LSPs from the table.
NOTE: This command is deprecated and may be removed completely in a future
release. The function provided by this command has been replaced by the ldp
ip-forwarding command.
Options
■
egress—Has no effect
■
ingress—Has no effect
■
access-list—Specifies that listName is an access list
■
prefix-list—Specifies that listName is a prefix list
■
listName —Name of access list or prefix list that specifies LSPs over which IP
interfaces are created
■
host-only— Specifies that only LSPs to host addresses are added to the IP routing
table
■
policy-list—Removes previously applied access lists or prefix lists
Mode
Global Configuration
mpls topology-driven-lsp ip-interfaces
■ 1403
Chapter 13: M Commands