Juniper JUNOSE 11.0, Command Reference Manual

Page: 294 / 1486

baseline ipv6 tcp
Syntax
baseline ipv6 tcp [ vrf vrfName ] [ localAddress localPort remoteAddress remotePort ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
ip keyword removed and ipv6 keyword added in JUNOSe Release 7.2.0.
Description
Sets a statistics baseline for only IPv6 TCP statistics. The router implements the
baseline by reading and storing the statistics at the time the baseline is set and then
subtracting this baseline whenever baseline-relative statistics are retrieved. There is
no
no version.
Options
■
vrfName— Name of the VRF; string of 1–32 alphanumeric characters
■
localAddress— Local IPv6 address on the router
■
localPort— Local TCP port number on the router
■
remoteAddress— IPv6 address of remote router
■
remotePort —TCP port number on remote router
Mode
Privileged Exec
252 ■
baseline ipv6 tcp
JUNOSe 11.0.x Command Reference Guide A to M