Juniper JUNOSE 11.0 Command Reference Manual Download

Page: 1294 / 1486

mark-exp

Syntax

[ no ] [ suspend ] mark-exp

expValue

[ mask

expMask

] [ profile

ProfileName

]

Release Information

Command introduced before JUNOSe Release 7.1.0.

profileName

variable added in JUNOSe Release 7.2.0.

Description

Defines an MPLS policy rule that specifies the value of the EXP bits. The

version

removes the rule from the policy list; the

suspend

version temporarily suspends the

policy rule; the

no suspend

version resumes application of a suspended rule.

NOTE:

This command replaces the Policy List Configuration version of the

mark-exp

command, which may be removed completely in a future release.

Options

expValue

—EXP bit value assigned to packets; number in the range 0–7

■

expMask

—Mask applied to modify some of the EXP bits in IP packet; integer in

the range 1–7

■

profileName

—Name of the rate-limit profile to be used in a policy (up to 40

alphanumeric characters)

Mode

Classifier Group Configuration

Summary of Contents for JUNOSE 11.0















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for JUNOSE 11.0

Reviews:

Related manuals for JUNOSE 11.0

Brands by name

Popular brands

Juniper JUNOSE 11.0, Command Reference Manual

Search results

Summary of Contents for JUNOSE 11.0

Reviews:

Related manuals for JUNOSE 11.0

Brands by name

Popular brands