Juniper JUNOSE 11.0, Command Reference Manual

Page: 821 / 1486

ip extcommunity-list
Syntax
ip extcommunity-list listName { permit | deny }
extendedCommunity [ extendedCommunity ]*
no ip extcommunity-list listName [ { permit | deny }
extendedCommunity [ extendedCommunity ]* ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Defines an extended-community (extcommunity) list to be referenced in a route
map. The
no version deletes the extcommunity.
Options
■
listName —Name of the extended-community list
■
permit—Permits membership in the extended community for matching
conditions
■
deny—Denies membership in the extended community for matching conditions
■
extendedCommunity —Extended community specified in the format:
{rt | soo } { ASN : nn | ipAddress : nn }
■
rt—Specifies a route-target community; consists of one or more routers that
can receive a set of routes advertised by BGP that carry the
extended-community attribute
■
soo—Specifies a Site-of-Origin community; consists of one or more routers
that injects a set of routes into BGP that carry the extended-community
attribute
■
ASN : nn— Identifies the extended community by a 16-bit autonomous system
number followed by a 32-bit integer
■
ipAddress : nn —Identifies the extended community identified by an IP address
followed by a 16-bit integer
■
*—Indicates that one or more parameters can be repeated multiple times in a
list in the command line
Mode
Global Configuration
ip extcommunity-list
■ 779
Chapter 10: I Commands