Juniper JUNOSE 11.0, Command Reference Manual

Page: 1463 / 1486

multicast
Syntax
multicast { permit | deny }
no multicast
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Modifies the subscriber policy for the multicast protocol to define whether the
subscriber (client) interfaces that belong to a bridge group or to a VPLS instance
forward (permit) or filter (deny) multicast packets. The
no version restores the default
value, permit multicast packets.
You cannot change the default subscriber policy values for trunk (server) interfaces
that belong to a bridge group or to a VPLS instance. You also cannot change the
default subscriber policy values for a VPLS virtual core interface, which acts as a
trunk interface. The VPLS virtual core interface represents all of the MPLS tunnels
from the router to the remote VPLS edge (VE) devices.
Options
permit—Specifies that the subscriber interface associated with the bridge group
or VPLS instance forwards multicast packets
■
■
deny—Specifies that the subscriber interface associated with the bridge group
or VPLS instance filters multicast packets
Mode
Subscriber Policy Configuration
multicast
■ 1421
Chapter 13: M Commands