Jungheinrich EKS 314, Operating Manual

Page: 80 / 225

F 5
0805
.USA
– Undo the battery retainer (8) by moving the lever (9) down and remove the retainer.
– Pull the battery (6) onto the side of the prepared battery trolley.
Q wW
Make sure the battery trolley is properly secured.
Q wW
After replacing/fitting the battery (6), make sure that the battery is well
secured in the battery compartment.
NOTICE The battery retainers (7, 8) can swap positions. This means that they can
both be fitted in either the left or right side of the truck’s chassis.
Assembly is the reverse order.
Q wW
To avoid pushing the battery (6) through on assembly, the battery retainer (7)
must first be plugged in on the opposite side.
Q wW
After installing again, check all cables and connectors for signs of visible
damage and before using the truck again check that:
– the battery retainer (8) is fitted and secured by the lever (9),
– the right and left side sections (3) are securely fitted and the battery panel (4) is
firmly closed.
6
8
7
9
F 5
0805
.USA
– Undo the battery retainer (8) by moving the lever (9) down and remove the retainer.
– Pull the battery (6) onto the side of the prepared battery trolley.
Q wW
Make sure the battery trolley is properly secured.
Q wW
After replacing/fitting the battery (6), make sure that the battery is well
secured in the battery compartment.
NOTICE The battery retainers (7, 8) can swap positions. This means that they can
both be fitted in either the left or right side of the truck’s chassis.
Assembly is the reverse order.
Q wW
To avoid pushing the battery (6) through on assembly, the battery retainer (7)
must first be plugged in on the opposite side.
Q wW
After installing again, check all cables and connectors for signs of visible
damage and before using the truck again check that:
– the battery retainer (8) is fitted and secured by the lever (9),
– the right and left side sections (3) are securely fitted and the battery panel (4) is
firmly closed.
6
8
7
9