Jungheinrich EKS 314, Operating Manual

Page: 14 / 225

C 3
0108
.USA
Identification plate:
We highly recommend that the data from the identification plate be copied onto the
diagram below to ensure that this important data is available to the operator and that
these instructions are not inadvertently used with any other product.
The user is responsible for confirming that all identification plates and caution and in-
struction markings are in place and legible (refer to section “Identification points and
data plates“ in chapter D).
Q wW
Industrial truck use is subject to certain hazards that cannot be completely
eliminated by mechanical means. Those risks can, however, be minimized by
the exercise of intelligence, care and common sense. Operators must,
therefore, be competent, careful, physically and mentally fit, and thoroughly
trained in the safe operation of the equipment and load handling.
for type "E" industrial trucks with type "E" battery
Built in compliance with ASME B 56.1
C 3
0108
.USA
Identification plate:
We highly recommend that the data from the identification plate be copied onto the
diagram below to ensure that this important data is available to the operator and that
these instructions are not inadvertently used with any other product.
The user is responsible for confirming that all identification plates and caution and in-
struction markings are in place and legible (refer to section “Identification points and
data plates“ in chapter D).
Q wW
Industrial truck use is subject to certain hazards that cannot be completely
eliminated by mechanical means. Those risks can, however, be minimized by
the exercise of intelligence, care and common sense. Operators must,
therefore, be competent, careful, physically and mentally fit, and thoroughly
trained in the safe operation of the equipment and load handling.
for type "E" industrial trucks with type "E" battery
Built in compliance with ASME B 56.1