Art. No. SC 1000 KNX
level (1.).
Once the page of the selected room is opened, all KNX channels allocated to the room appear
in the display. Each channel has a sensor surface that can be touched in order to operate this
channel. The channels are each identified in the sensor surface by their name, which can be
entered individually in the ETS (e.g. "Ceiling spot", "wall luminaire", "Venetian blind left").
Up to 4 channels are displayed simultaneously in a room view. If more than 4 channels are
allocated, the channel list can be switched by the sensor surfaces
X
/
Y
or alternatively by a
vertical movement of your finger. if only one or two channels are allocated to a room, the display
grid is adapted automatically so that larger sensor surfaces are displayed. In the case of 3
allocated channels, a placeholder surface without a text name is displayed for the fourth
unallocated channel. This placeholder surface has no function. Placeholders are only displayed
if no channels at all have been allocated to a room.
To return to the main menu level, press the "
Z
Room page" icon (2.) in the Room view in the
status line at the top edge of the screen.
Figure 17: Example of a room view (right) - 3 KNX channels are allocated
Page 71 of 347
Software "Smart Control 501511"
Functional description
