Art. No. SC 1000 KNX
4.2.4.7 Delivery state
As long as the device has not yet been programmed with application data in the ETS, a demo
project is present in the device. The demo project can be recalled by pressing the "Demo"
button with your finger, which is visible in the delivery state in the start screen after booting.
The demo project displays various control and display elements and enables navigation through
different display pages. With the demo project, configurable device functions can be clearly
displayed for presentation purposes.
The as delivered state persists until the application is programmed into the device (see chapter
2.4. Commissioning). After programming with the ETS, the functions configured in the ETS are
then enabled.
Unloading of the application program by the ETS completely deactivates the device function
that was last programmed. In this case, the device is reset again to the delivery state described
above.
i
No bus communication takes place in the un-programmed delivery state of the device or in
the case of an application program unloaded via the ETS. The updating of status elements
of the demo project is simulated after an operation of the sensor elements.
i
Access to the administrator environment of the device can be protected optionally by a
password. The administrator password can be changed locally on the device and saved
permanently in the device memory.
Unloading of the device by the ETS has no effect on the password! It is only possible to
reset the password to the delivery state "0000" by manual resetting locally on the device.
Page 240 of 347
Software "Smart Control 501511"
Functional description
