Art. No. SC 1000 KNX
Function:
Venetian blind
Object
h
0
Function
Short time operation
Name
B.Module rocker/
B.Module button 1
1,2
Type
1-bit
DPT
1.007
Flag
C, -, T, (R)
3
Description
1-bit object for the transmission of telegrams with which a Venetian blind or
shutter drive motor can be stopped or with which the blind slats can be
adjusted by short time operation.
Function:
Venetian blind
Object
h
18
Function
Long-time operation
Name
B.Module rocker/
B.Module button 1
1,2
Type
1-bit
DPT
1.008
Flag
C, W, T,
(R)
3
Description
1-bit object for the transmission of telegrams with which a Venetian blind or
shutter drive motor can be can be moved upwards or downwards.
Function:
1-byte value transmitter
Object
h
0
Function
Value
Name
B.Module rocker/
B.Module button 1
1,2
Type
1 byte
DPT
5.xxx
Flag
C, W, T,
(R)
3
Description
1-byte object for the transmission of values from 0 to 255 (corresponding to
values from 0 % to 100 %). If the adjustment of the value is enabled, the
object can transmit telegrams cyclically after long actuation with which the
value can be reduced or increased by a presettable amount.
Function:
2-byte value transmitter
Object
h
0
Function
Value
Name
B.Module rocker/
B.Module button 1
1,2
Type
2 byte
DPT
7.xxx
Flag
C, W, T,
(R)
3
Description
2-byte object for the transmission of values from 0 to 65535. If the adjustment
of the value is enabled, the object can transmit cyclical telegrams after a long
press with which the value can be reduced or increased by an adjustable
amount.
1: The number of rockers or buttons depends on the planned device variant.
2: The objects have been described for rocker 1 or button 1 as an example. The objects for the
other rockers/buttons are defined in the same way by shifting the object number and changing
the object name.
3: For reading, the R-flag must be set. The last value written to the object via the bus or by the
device will be read.
Page 26 of 347
Software "Smart Control 501511"
Object table
