Art. No. SC 1000 KNX
20
50
75
100
200
500
750
1000
65535)" and "Value adjustment by long
button-press = enabled"!
Time between two
telegrams
0.5 sec
1 sec
2 sec
3 sec
This parameter defines the interval at
which the push button sensor transmits
new telegrams during a value
adjustment. Visible only if "Value
adjustment by long button-press =
enabled"!
Value adjustment with
overflow
Yes
No
If value adjustment is to be effected
without overflow (setting "No") and if the
pushbutton sensor reaches the lower
limit of the adjustment range (0°C, 0 lux,
0) or the upper limit (40°C, 1500 lux,
65535) during value adjustment, the
adjustment will be stopped automatically
by the sensor.
If the value adjustment with overflow is
programmed (setting "Yes") and if the
push-button sensor reaches the lower or
the upper limit, it will transmit the value
of this range limit and then add a pause
the duration of which corresponds to two
levels. Thereafter, the push button
sensor transmits a telegram with the
value of the other range limits and
continues the value adjustment in the
same direction.
The following parameters are only visible for the push-button function "Scene extension"...
Function
Scene extension without
storage function
Scene extension with
storage function
Recall of internal scene
extension without storage
function
Recall of internal scene
with storage function
This parameter defines the functionality
of the extension.
If the push button sensor is used as a
scene extension, the scenes can either
be stored in one or in several other
KNX/EIB devices
(e.g. light scene push button sensor).
During a scene recall or in a storage
function, the push button sensor
transmits a telegram with the respective
scene number via the extension object
of the rocker.
During the recall of an internal scene, a
scene stored internally in the universal
pushbutton sensor TSM is recalled or
stored again. In this case, the sensor
transmits no telegram to the bus via a
scene extension object. For this setting,
the internal scene function must be
enabled.
Page 331 of 347
Software "Smart Control 501511"
Parameters
