Art. No. SC 1000 KNX
Function
no function
Switching *
Dimming (Start/Stop)
Dimming (Brightness value)
Venetian blind/shutter
(Step/Move/Step)
Venetian blind/shutter
(Position)
Scene extension
1-byte value transmitter
2-byte value transmitter
Operating mode
switchover, internal
Setpoint shift, internal
Fan controller, internal
ASCII text
*: In channel 1, the function
"switching" is set as the
default function.
The KNX channels enable control
commands to be transmitted to the bus
(e.g. "Switch lighting", "Move blind"
"Change-over operating mode of room
temperature controller") depending on
the function set here. The device can
receive statuses or values in the
opposite direction via the channels and
visualize them in the device display.
Operation and display elements
assigned to the individual KNX channels
and which can be recalled via the room
and function pages are available for this
purpose. The character of these display
elements depends on the channel
function set here.
Frequently used KNX channels can be
allocated to the start and favourite page
whereby these channels can be
operated quickly and clearly.
Additionally, their statuses can be read
easily without having to navigate via
display pages.
Name
Text with a maximum
variable length of 18
characters, e. g. "
Light
"
A text name which is displayed on
different display pages for identification
of the activated function can be
assigned here to each KNX channel (e.
g. "Spots kitchen", "Venetian blind
bathroom"). The standard setting of this
parameter depends on the set channel
function.
The possible length of the text depends
on the set size of the letters or numbers
entered in the entry field and can vary. A
text with a maximum of 18 characters
can be entered.
The following parameters are only visible for the function "Switching"...
Icons
no icon
Icon 1: Status
Icon 2: Illumination
Icon 3: Present / Absent
Icon 4: Disabled / Enabled
An icon can be displayed in the lower
area of the channel display element.
This parameter defines which type of
status icon is used in the display
element. This makes it possible to adapt
the icon display to the activated function
(e.g. switching of lighting). The
configured status icon changes
depending on the switching state
thereby enabling the state of the
controlled KNX channel to be read
clearly.
The icon can be omitted optionally in the
display (setting: no icon).
Displaying status text
Page 254 of 347
Software "Smart Control 501511"
Parameters
